Showing all 12 results
AutoSET FD FinishRead more
AutoSET FD Finish
AutoSET FD Finish is a quick-drying, high gloss modified alkyd-acrylic enamel especially for OEM and refinish industries.
Epoxy coal tar FinishRead more
Epoxy coal tar Finish
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
Epoxy DTM FinishRead more
Epoxy DTM Finish
DTM is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperatures.
Epoxy GF FinishRead more
Epoxy GF Finish
A glass-reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the waterline) in marine applications where these resistance qualities are desired.
Epoxy HB FinishRead more
Epoxy HB Finish
A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical and corrosion resistance.
PU FinishRead more
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, It provides a smooth, durable finish that has superior resistance to corrosion, abrasion, and chemical exposure.
PU HB FinishRead more
PU HB Finish
Two-component, high solids acrylic aliphatic polyurethane finish. Finish coat for (anti-corrosive) coating systems on steel and concrete structures in atmospheric exposure conditions.
PU HS DTM FinishRead more
PU HS DTM Finish
A two-component, DTM urethane mastic, acrylic polyurethane finish providing anti-corrosion barrier protection and long term re-coatability.
SafeX Premium FinishRead more
SafeX Premium Finish
SafeX series is a water reducible alkyd enamel. This product has an excellent balance of fast dry, tough film properties and economical and can be applied to properly prepared metal substrates. This material is formulated to meet strict air quality regulations.
SynPURE DTM FinishRead more
SynPURE DTM Finish
SynPURE DTM is a single component, high solids, low VOC, modified alkyd finish. It is Direct to the metal coating which is replaced by multi-coat systems.
SynPURE Finish 1000 Series-Heavy DutyRead more
SynPURE Finish 1000 Series-Heavy Duty
SynPURE 1000 Series is a high build finish for Heavy-duty applications. Use as topcoat where corrosion protection required.
SynPURE modified alkyd finish/SynPURE Premium FinishRead more
SynPURE modified alkyd finish/SynPURE Premium Finish
SynPURE modified alkyd Paints are recommended as topcoat where mild corrosion and chemical resistance required.It can be used for both exterior and interior surfaces mainly on mild steel, wooden, and suitably prepared masonry surfaces.