Showing all 20 results
Cylcoaliphatic amine cured novalac finishRead more
Cylcoaliphatic amine cured novalac finish
This Novalac coating is a two-component glass flake reinforced epoxy coating designed to withstand the high temperatures of hot steel structures while protecting against corrosion. This epoxy composite coating withstands continuous temperatures up to 250°C and peak temperatures as high as 300°C.
Epoxy AL MasticRead more
Epoxy AL Mastic
Aluminum-pigmented, low-stress, high-solids mastic with outstanding performance properties and proven field history. It was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.
Epoxy coal tar FinishRead more
Epoxy coal tar Finish
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
Epoxy DTM FinishRead more
Epoxy DTM Finish
DTM is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperatures.
Epoxy GF FinishRead more
Epoxy GF Finish
A glass-reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the waterline) in marine applications where these resistance qualities are desired.
Epoxy HB FinishRead more
Epoxy HB Finish
A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical and corrosion resistance.
Epoxy MasticRead more
This is a two-component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long-lasting protection in environments with high corrosivity.
Epoxy Micaceous CoatingRead more
Epoxy Micaceous Coating
Epoxy Micaceous Coating is a low VOC, high solids, high build epoxy with pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop. A range of anticorrosive coating systems in a wide range of aggressive environments.
Epoxy Novolac FinishRead more
Epoxy Novolac Finish
It is an amine adduct cured, phenolic epoxy (novolac) coating with very good adhesion and excellent chemical and high-temperature resistance.
Epoxy Novolac HB FinishRead more
Epoxy Novolac HB Finish
Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical exposure. Provides enhanced chemical protection for a broader and more concentrated range of acids.
Epoxy phenalkamine MasticRead more
Epoxy phenalkamine Mastic
This is a two-component phenylamine cured epoxy mastic coating with high volume solids. It is surface tolerant and fast-drying and can be used as a primer or mid-coat for long-lasting protection in atmospheric environments.
Epoxy Primer SystemRead more
Epoxy Primer System
It is a two-component, polyamine adduct cured epoxy primer pigmented with anti-corrosive zinc phosphate and Zinc Chrome. Offers excellent resistance to corrosion and exceptional adhesion to ferrous substrates. Comply with the requirements of BS5493.
Epoxy Solvent free GFRead more
Epoxy Solvent free GF
Solvent-Free GF is a solvent-free, two-component, high-build, polyamine adduct cured glass flake containing epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater, and freshwater.
Epoxy topcoat FinishRead more
Epoxy topcoat Finish
This is a two-component polyamide cured epoxy glossy finish for decorative purposes. It is high end and a fast-drying finish.
Epoxy Zinc HB PrimerRead more
Epoxy Zinc HB Primer
A two-component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low-temperature cure, and rapid overcoating properties.
Hybrid Epoxy Zinc rich PrimerRead more
Hybrid Epoxy Zinc rich Primer
It is a high performance two-component zinc-rich epoxy primer where extended durability and excellent corrosion protection are required.It is come up with different zinc percentage. Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Inorganic Zinc Ethyl Silicate Primer/finish-InorganosilRead more
Inorganic Zinc Ethyl Silicate Primer/finish-Inorganosil
This Primer/finish is designed to withstand high temperatures and provide good corrosion protection. It has been specifically designed for use on areas that operate at temperatures above 120°C and is resistant to continuous high temperatures up to 540 °C
PU FinishRead more
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, It provides a smooth, durable finish that has superior resistance to corrosion, abrasion, and chemical exposure.
PU HB FinishRead more
PU HB Finish
Two-component, high solids acrylic aliphatic polyurethane finish. Finish coat for (anti-corrosive) coating systems on steel and concrete structures in atmospheric exposure conditions.
PU HS DTM FinishRead more
PU HS DTM Finish
A two-component, DTM urethane mastic, acrylic polyurethane finish providing anti-corrosion barrier protection and long term re-coatability.