Showing all 12 results
Hammer FinishRead more
Hammertone paint is a quick-drying, hammer-like finish paint. It gives an excellent aesthetic glossy hammer look.
HR Al 250°CRead more
HR Al 250°C
Air-dried coating suitable for high-temperature exposures up to 273°C. Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 149°C is acceptable and will impart added strength and integrity to the coating.
HR Al 400°CRead more
HR Al 400°C
HR Al 400 is a heat resistant aluminum pigmented polysiloxane paint that cures to a hard film at ambient conditions. Air-dried coating suitable for high-temperature exposures up to 435°C.
HR Al 600°CRead more
HR Al 600°C
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C-640°C with anti-corrosive advancement.
HR MattRead more
Air-dried coating available in matt colors and suitable for high-temperature exposures up to 500°C. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments.
Stipple FinishRead more
Stipple paint is a solvent-based powder coating effect paint. It gives a fine glossy texture effect with an aesthetic finish.
SynPURE DTM FinishRead more
SynPURE DTM Finish
SynPURE DTM is a single component, high solids, low VOC, modified alkyd finish. It is Direct to the metal coating which is replaced by multi-coat systems.
SynPURE Finish 1000 Series-Heavy DutyRead more
SynPURE Finish 1000 Series-Heavy Duty
SynPURE 1000 Series is a high build finish for Heavy-duty applications. Use as topcoat where corrosion protection required.
SynPURE modified alkyd finish/SynPURE Premium FinishRead more
SynPURE modified alkyd finish/SynPURE Premium Finish
SynPURE modified alkyd Paints are recommended as topcoat where mild corrosion and chemical resistance required.It can be used for both exterior and interior surfaces mainly on mild steel, wooden, and suitably prepared masonry surfaces.
SynPURE Primer 1000 Series-Heavy DutyRead more
SynPURE Primer 1000 Series-Heavy Duty
Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and anti corrosive Properties.
SynPURE Primer 77/37Read more
SynPURE Primer 77/37
SynPURE Primer series is a Solvent-borne modified alkyd primer. This product has an excellent balance of fast dry and tough film properties. It provides corrosion protection on structural steel in mildly to moderately corrosive environments.
SynPURE Zinc Chrome PrimerRead more
SynPURE Zinc Chrome Primer
SynPURE Chrome Primer is a Single pack, air drying, formulated with a special type of synthetic alkyd binder and micro zinc pigment to withstand high degree corrosion. It is for Mild Steel and non-ferrous surfaces providing hard and tough film.